数值模拟气/气喷嘴速度比对燃烧性能的影响

为研究应用于全流量补燃循环发动机的不同气/气喷嘴得到的燃烧流场,通过求解NavierStokes方程组,对不同燃料与氧化剂速度比下的流动燃烧过程进行了数值计算,计算结果与实验结果吻合。仿真结果表明:增加速度比能使燃烧火焰面提前,燃烧效率变大。如果发动机的长度受到限制,可以适当增加速度比以实现高效燃烧。     

姿态角单次调整的固体运载火箭耗尽关机能量管理方法

固体运载火箭传统耗尽关机制导方法姿态角调整次数过多,不利于控制系统设计。提出了姿态角单次调整的耗尽关机能量管理策略:以火箭的待增视速度方向为基准,通过计算火箭所需耗费的视速度,优化选取火箭的初、末姿态角;火箭以恒定角速率从初姿态角变为末姿态角,达到末姿态角时保持恒定,直至耗尽关机。仿真结果表明,新方法在满足火箭的终端速度约束条件下,视速度模量耗费百分比超过30%,且姿态角单向调整,有利于控制系统的工程设计。     

阶比谱分析与汽车起动电机故障的实时诊断

本文主要论述阶比谱分析方法及其在汽车起动电机故障实时诊断中的应用。首先阐述了阶比谱分析的原理以及阶比采样中混迭与泄漏的产生及其抑制方法,然后讨论了如何在起动电机运行过程短、升速快的情况下获取感兴趣的噪声信号,进而采用阶比谱分析方法从信号中提取故障特征信息,最后利用阀值判别法起动电机的故障进行实时诊断。     

多点偏心起爆对破片速度增益的影响

多点偏心起爆后,爆轰波相互作用在定向区域内产生了马赫波超压,使得该区域破片速度产生增益.利用爆轰波反射理论,建立多点偏心起爆后爆轰波相互作用特性的理论模型,并确定定向区内破片速度的增益特性.3种不同起爆方式的仿真计算和静爆试验结果对比表明,定向区内不同起爆方式得到的破片增益程度较为吻合.     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Research on fuze microswitch based on corona discharge effect

Abnormal voltages such as electrostatic, constant current, and strong electromagnetic signals can erro-neously trigger operation of MEMS pyrotechnics and control systems in a fuze, which may result in casualties. This study designs a solid-state micro-scale switch by combining the corona gas discharge theory of asymmetric electric fields and Peek's Law. The MEMS switch can be transferred from "off" to"on" through the gas breakdown between the corona electrodes. In the model, one of the two electrodes is spherical and the other flat, so a non-uniform electric field is formed around the electrodes. The theoretical work is as follows. First, the relation among the radius of curvature of the spherical electrode, the discharge gap, and the air breakdown voltage is obtained; to meet the low voltage (30-60 V) required to drive the MEMS switch, the radius of curvature of the spherical electrode needs to be 10-50 μm and the discharge gap between the two electrodes needs to be 9-11 μm. Second, the optimal ratio ε is introduced to parameterize the model. Finally, the corona discharge structural parameters are determined by comparing the theoretical and electric field simulation results. The switch is then fabricated via MEMS processing. A hardware test platform is built and the performing chip tested. It is found that when the electrode gap is 9 μm, the electrostatic voltage is at least 37.3 V, with an error of 2.6% between the actual and theoretical air breakdown voltages. When the electrode gap is 11 μm, the electrostatic voltage is at least 42.3 V, with an error of 10.5% between the actual and theoretical air breakdown voltages. Both cases meet the design requirements.     

一种改进的变异粒子群算法研究

粒子群优化算法PSO(Partic le Swarm Optim ization)是一类性能优越的寻优算法。但由于早熟问题,影响了算法性能的发挥。针对这一问题,引入粒子距离的概念,提出一种新的PSO改进方法(称为NA-PSO)。通过求解组网雷达的系统偏差,表明了NA-PSO算法的可行性,与对比方法相比较,能有效配准,且具有更好的收敛精度和更快的进化速度。     

Maximizing the ratio of two convex functions over a convex set

The purpose of this article is to present an algorithm for globally maximizing the ratio of two convex functions f and g over a convex set X. To our knowledge, this is the first algorithm to be proposed for globally solving this problem. The algorithm uses a branch and bound search to guarantee that a global optimal solution is found. While it does not require the functions f and g to be differentiable, it does require that subgradients of g can be calculated efficiently. The main computational effort of the algorithm involves solving a sequence of subproblems that can be solved by convex programming methods. When X is polyhedral, these subproblems can be solved by linear programming procedures. Because of these properties, the algorithm offers a potentially attractive means for globally maximizing ratios of convex functions over convex sets. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

编队战斗机超视距空战效能评估

第三代战斗机主要空战模式是超视距空战,对编队战斗机超视距空战的全过程进行分析,建立了战斗机编队和导弹的运动模型,以领先发射概率和空战交换比作为评估指标,对编队战斗机超视距空战效能进行评估,最后给出了算例,重点分析了地面防空火力和编队战斗机数量、携带导弹总数等因素对空战交换比的影响.     

用于目标弱信号处理的三重相关匹配滤波技术

分析了在二重相关匹配滤波技术的基础上实现三重相关匹配滤波的方法。三重相关匹配滤波对于目标的弱信号进行检测和处理 ,具有广泛的实用价值。给出了一个红外搜索目标信号处理的计算机模拟结果 ,并对计算机模拟结果进行了分析 ,证明了三重相关匹配滤波技术相对于二重相关和三重相关检测技术的优越性